Use the filters to find the tests that you need or search by name.
Extraction then GC-MS with derivatization
Solvent extraction, GC-MS for 13 phthalate esters
Water extraction 72h at 37°C, HS-GC-MS analysis
IPA extraction 72h at 37°C, GC-MS screening
Hexane extraction 72h at 37°C, GC-MS analysis
Water extraction 72h at 50°C, GC-MS screening
L929 cells exposed to extracts, XTT viability assay
MatTek EpiDerm™ reconstructed human epidermis model
L929 cells, 24h direct contact, morphology assessment
Agar overlay method with L929 cells, zone assessment
Extraction in DMF, GC-FID quantification
Titration of aqueous extract
GC-MS analysis for butanediol diglycidyl ether
Direct GC-MS with BSTFA derivatization
Direct measurement at 25°C with conductivity cell
Ethylene glycol by GC-FID after extraction
Simulated use extraction, GC-FID headspace analysis
Additional extraction cycle for EO/ECH
Conditions per customer, Tenax extraction, GC/LC-MS
Volatile siloxane migration test on Tenax
Multiple cycles per customer, Tenax, GC/LC-MS
GC-MS quantification in CBD products
Multiple cycles per customer, gravimetry
Multiple cycles per customer in oil, gravimetric analysis
Conditions per customer in oil simulant, gravimetry
Conditions per customer in simulant, gravimetric analysis
Multiple cycles per customer, gravimetric measurement
Conditions per customer, gravimetric determination
Direct pH measurement at 25°C with calibrated electrode
Direct GC-MS analysis for 13 phthalates
DCM extraction, FTIR quantification at 1260 cm-1
Method validation with count standards at 10µm and 25µm
Direct water analysis by combustion/oxidation method
Recovery validation with hydrocarbon standard, GC-MS method
Hexane extraction 24h, GC-MS quantification
Extraction in particle-free water, light obscuration counting
Gravimetric analysis of residual water on devices
GC-MS for cannabinoid profile
Spectrophotometric detection at 405nm after alkaline extraction
Recovery study with hemoglobin spike at 3 levels
BCA assay after extraction in 1% Triton x100 solution
Recovery validation with BSA spike, 3 concentration levels
72h extraction at 37°C or 50°C, TOC measurement of extract
Recovery study with sucrose spike in extraction water
Membrane filtration, TSA plate count, 3d at 30-35°C
Challenge test with 5 organizms, log reduction monitoring
Direct LAL test on water sample
Recovery test with B.subtilis spike on products
Heat shock, serial dilution, TSA plate count
Recovery efficiency + method suitability + 2 ID of dominants
Extraction, filtration, TSA incubation 3-5d at 30-35°C, aerobic conditions
Anaerobic incubation on TSA or FTM media, 5-7 days
Extraction/rinse, filtration, TSA 3-5d & SDA 5-7d incubation
Spore enumeration by heat shock and plate count
Method suitability test with E.coli ATCC 8739
Kinetic chromogenic LAL assay, 0.005-5.0 EU/ml range
Screening at multiple dilutions to find valid test range
Interference test at 3 dilutions with spike recovery
Crystal violet/iodine/safranin staining of colonies
Growth promotion with 5 strains on TSA plates
Growth promotion test with C.albicans, A.brasiliensis on SDA
Membrane filtration, R2A agar incubation 7d at 20-25°C
Direct inoculation or membrane filtration, 14d at 20-25°C & 30-35°C
Method suitability study for product-specific sterility testing
Bacteriostasis/fungistasis test with 6 challenge organizms
Selective enrichment at 42°C, microaerophilic conditions
Acid/heat treatment, BCYE agar culture, 10d at 35°C
Selective enrichment and plating for target organizms
Enrichment in LST broth, confirmation on EMB/MacConkey agar
Spore suspension filtration and culture incubation 7d at optimal temperature
Direct incubation in growth media, 7d at optimal temperature
Biochemical profiling from pure colonies
Underwater pressurization, leak detection by bubbles
Pressure validation for bubble emission test
Internal pressurization to seal failure point
Dye penetration test, passive diffusion method
Large format dye penetration, passive method
Cold water extraction, pH measurement
Additional sample pH test
Seal strength validation at multiple locations
Tensile test at 90° or 180°, strength measurement
Visual defects assessment per acceptance criteria
Laser particle counter, 0.3 to 5.0 µm
Contact/settle plates, TSA incubation 3-5d at 30-35°C
Bacterial reverse mutation assay with/without metabolic activation
Mammalian cell forward mutation assay with colony sizing
Direct/extract contact with RBCs, hemoglobin release
Mouse systemic injection, polar/non-polar extracts
Rabbit intradermal injection of polar/non-polar extracts
Rabbit eye irritation test (Draize method)
Guinea pig maximization test, polar/non-polar extracts
Rabbit skin application, 4h exposure, 72h observation
Rabbit pyrogen test, saline extract, temperature monitoring
Mouse systemic toxicity per USP Class VI requirements
Rabbit intracutaneous reactivity test with extracts
Rabbit muscle implantation, histopathology evaluation
Hamster cheek pouch or oral mucosa irritation test
GLP-compliant rabbit pyrogen test with saline extract
ATR-FTIR spectrum comparison with reference
Complexometric titration or colorimetric test
ICP-MS analysis for heavy metals suite
Additional element quantification by ICP-MS
Quantitative analysis for single element after extraction
Water extraction, semi-quantitative scan for 40 elements
Hexane extraction, LC-MS analysis
Water extraction, LC-MS screening for non-volatiles
IPA extraction, LC-MS non-volatile screening
Particle extraction, SEM imaging + EDX elemental mapping
Additional SEM-EDX analysis on subsequent samples
UV spectrophotometry or ion chromatography
Evaporation of extract, gravimetric determination
LC-MS/MS for PFAS compounds (EU list)
Acid digestion, ICP-MS for heavy metals
Surface elemental analysis at 3 locations, depth <10nm
XRF analysis for Pb, Cd, As in food contact materials
XRF elemental screening for RoHS compliance
Luminescence detection after swab/rinse extraction
Fluorescent DNA substrate degradation assay
qPCR quantification with human-specific primers
qPCR amplification efficiency test with internal control
Fluorometric assay with RNA substrate degradation monitoring
DNA extraction, 16S/18S rRNA amplification and sequencing
Protein fingerprinting by mass spectrometry from colonies
Decontamination, concentration, culture on Löwenstein-Jensen
Long-term seal integrity under constant pressure
Sustained pressure test over extended time